Modular Cooking Range Line
EVO700 2 Frontal Hot Plate Electric Induction Cooking Top Range 372023
Frontal 2-zone (5 kW each) electric induction cooking top with rear condiment holder (6x1/9GN) - hp
- Features
- Specifications
- Documents
-
Glass ceramic cooking surface with 2 independently controlled induction zones with a power of 5 kW per zone.
-
Pots diameter to be used : min 12cm, max 28 cm in order to obtain maximum heating efficiency.
-
Suitable for countertop installation.
-
Almost the entire surface of the ceramic plate can be used without “dead” spots.
-
Indicating lamp for each zone located on control console.
-
Induction plates endowed with overheating safety device.
-
Power to the individual zones can be set with progressive output i.e. fine regulation at the lower and larger progress at the upper levels.
-
Low heat dissipation to the kitchen.
-
The smooth, glass ceramic plate is not directly heated, so there is no burning on cooking surface.
-
The well beneath the container support can be filled with ice to keep condiments cool and incorporates and overflow pipe for drainage.
-
IPX 4 water protection.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
One piece pressed 1.5 mm work top in Stainless steel.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Key Information:
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Induction compatible pots & pans must be used.
- Net weight: 57 kg
- Shipping weight: 60 kg
- Shipping height: 540 mm
- Shipping width: 830 mm
- Shipping depth: 850 mm
- Shipping volume: 0.38 m³
- [NOT TRANSLATED] IH72P
- Induction Top Dimensions (width): 800 mm
- Induction Top Dimensions (depth): 700 mm
Electric
- Supply voltage: 380-415 V/3 ph/50/60 Hz
- Predisposed for: 380-415V 3~ 50/60Hz 10kW
- Total Watts: 10 kW