Modular Cooking Range Line
EVO700 Freestanding Gas Pasta Cooker, 1 Well 24.5 litres 372350

24,5-lt gas pasta cooker with 1 well, (Watermark & AGA) - Australia

  • Features
  • Specifications
  • Documents
  • ESD available as accessory (installed separately): energy saving device uses heat produced by water drained through the overflow to pre-heat tap-in water up to 60°C, for constant water boiling.

  • EnergyControl: unique feature for fine power adjustment to control boiling level and optimize energy consumption.

  • In addition to cooking pasta, the appliance can be used for noodles of every kind, rice, dumplings and vegetables.

  • High efficiency 10.5 kW burners in stainless steel with flame failure device and optimized combustion, located below the well.

    • No electrical connection needed.

    • Water basin in 316 type Stainless steel.

    • Provided with integrated drip zone on which baskets can be placed for draining purposes.

    • 24.5 liters water basin.

    • Unit to feature skimming zone for starch removal: improved water quality over time.

    • Easy-to-use control panel with gas cock and piezo ignition.

    • Safety thermostat to avoid operation without water.

    • Continuous water filling regulated through a manual water tap.

    • Large drain with manual ball-valve for fast emptying of well.

    • Automatic lifting system (optional accessory): 200mm wide unit with two stainless steel basket supports, holding one GN 1/2 basket each, to be placed on either or both sides of machine to provide automatic lifting for four small portion baskets (to

    • All major compartments located in front of unit for ease of maintenance.

    • Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).

    • Water basin is seamlessly welded into the top of the appliance.

    • IPx4 water protection.

    • All exterior panels in Stainless Steel with Scotch Brite finishing.

    • One piece pressed 1.5 mm work top in Stainless steel.

    • Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Water:
  • Total hardness: 5-50 ppm
  • Drain "D": 1"
  • Incoming Cold/hot Water line size: 1/2"
Gas
  • Gas Power: 11.5 kW
  • Standard gas delivery: Natural Gas G20 (20mbar)
  • Gas Type Option: LPG
  • Gas Inlet: 1/2"
Key Information:
  • If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
  • Usable well dimensions (width): 250 mm
  • Usable well dimensions (height): 300 mm
  • Usable well dimensions (depth): 400 mm
  • Well Capacity (MAX): 24.5 lt MAX
  • Net weight: 50 kg
  • Shipping weight: 46 kg
  • Shipping height: 1130 mm
  • Shipping width: 460 mm
  • Shipping depth: 820 mm
  • Shipping volume: 0.43 m³
CAD Drawings
(153,03 KB)
Data Sheet
BIM/Revit
(636 KB)

Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×

Compare Products (0/4)