Control knobs provide smooth, continuous rotation from min to max power level.

Suitable for countertop installation.

Unit to be mounted on open base cupboards, bridging supports or cantilever systems.

The four 10 kW high efficiency burners are available in 100 mm diameter with continuous power regulation from 2.2 kW to 10 kW.

Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.

Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.

Burners with optimized combustion.

Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.

Protected pilot light.

The special design of the control knob system guarantees against water infiltration.

IPX5 water protection.

Pan supports in stainless steel.

Unit is 900mm deep to give a larger working surface area.

All exterior panels in Stainless Steel with Scotch Brite finishing.

AISI 304 stainless steel worktop, 2mm thick.

Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.