6-burner (10 kW each) gas boiling top
- Features
- Specifications
- Documents
-
Control knobs provide smooth, continuous rotation from min to max power level.
-
Suitable for countertop installation.
-
Unit to be mounted on open base cupboards, bridging supports or cantilever systems.
-
The six 10 kW high efficiency burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers.
• 60 mm burners with continuous power regulation from 1,5 to 6 kW
• 100 mm burners with continuous power regulation from 2.2 kW to 10 kW -
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
-
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
-
Burners with optimized combustion.
-
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
-
Protected pilot light.
-
The special design of the control knob system guarantees against water infiltration.
-
IPX5 water protection.
-
Pan supports in stainless steel.
-
Unit is 900mm deep to give a larger working surface area.
-
All exterior panels in Stainless Steel with Scotch Brite finishing.
-
AISI 304 stainless steel worktop, 2mm thick.
-
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.
Gas
- Natural gas - Pressure: 7" w.c. (17.4 mbar)
- Gas Power: 60 kW
- Standard gas delivery: Natural Gas G20 (20mbar)
- Gas Type Option: LPG;Natural Gas
- Gas Inlet: 1/2"
Key Information:
- If appliance is set up or next to or against temperature sensitive furniture or similar, a safety gap of approximately 150 mm should be maintained or some form of heat insulation fitted.
- Net weight: 110 kg
- Shipping weight: 79 kg
- Shipping height: 530 mm
- Shipping width: 1020 mm
- Shipping depth: 1260 mm
- Shipping volume: 0.68 m³
- Front Burners Power: 10 - 10 kW
- Back Burners Power: 10 - 10 kW
- Middle Burners Power: 10 - 0/10 - 0 kW
- [NOT TRANSLATED] N9CG
- Back Burners Dimension - mm Ø 100 Ø 100
- Front Burners Dimension - mm Ø 100 Ø 100
- Middle Burners Dimension - mm Ø 100 Ø 100