Warewashing
Hood Type Dishwasher, Manual with Automatic Deliming Device & Advanced Filtering System 504273
Hood type dishwasher, with double skin insulated manual hood, guaranteed rinse system (Active), automatic deliming device, advanced filtering system, built-in rinse aid dispenser, detergent dispenser and drain pump, WRAS approved, 80r/h
- Features
- Specifications
- Documents
-
Green light of Guaranteed Rinse System (ACTIVE) confirms that items have been rinsed properly.
-
NSF/ANSI 3 and DIN 10512 compliant.
-
Maximum capacity per hour of 80 racks or 1.440 dishes (High productivity mode) easy to switch to 63 racks or 1.134 dishes (NSF/ANSI 3 mode) by pressing a button.
-
45/84/150 seconds cycles (High productivity mode); 57/84/150 seconds cycles (NSF/ANSI 3 mode).
-
CLEAR BLUE advanced filtering system provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.
-
Advanced Filtering System provides cleaner wash water and higher active detergent thus ensuring better washing performances and lower running costs.
-
Built-in atmospheric boiler sized to raise incoming water to a minimum of 84 °C for sanitizing rinse. No external booster is required. Constant temperature of 84 °C throughout the rinsing cycle regardless of the network's water pressure.
-
Unique temperature interlock guarantees required temperatures in both the wash and final rinse.
-
Incorporated Soft Start feature to offer additional protection to more delicate items.
-
Slanted wash arms and sloped ceiling to avoid detergent-filled wash water dropping on clean dishes after the rinsing phase, thus guaranteeing ideal washing results.
-
Cycle may be interrupted at any time by lifting the hood.
-
Automatic self-cleaning cycle and self-draining vertical wash pump and boiler to avoid bacteria proliferation.
-
State-of-the-art electronic controls with built-in programming, self-diagnostics for serviceability and automatic interior self-cleaning cycle.
-
Built-in rinse aid and detergent dispenser with automatic initial and continuous cycle loading for perfect result while minimizing service and maintenance needs.
-
Boiler power setting from control panel to facilitate technician's operation when reducing total installed power, thus avoiding the need of machine opening.
-
Three phase electrical connection, convertible to single phase on-site.
-
IP25 protection against water jet, solid objects and small animals (larger than 6 mm).
-
Heavy duty Stainless steel construction. Internal cavity as well as exterior panels are in 304 series Stainless steel.
-
Pressed tank in front position to facilitate cleaning.
-
Double skin insulated hood.
-
Specially designed Stainless steel wash/rinse arms and nozzles provide superior cleaning action.
-
Revolving interchangeable Stainless steel wash/rinse arms above and below the rack, screw out for simple clean up.
-
Pre-arranged for on-site HACCP implementation and Energy Management device.
-
Element protection from dry fire and low water.
-
Unit to include drain, detergent and rinse aid dispenser pumps
Electric
- Supply voltage: 400 V/3N ph/50 Hz
- Convertible to: 230V 1N~; 230V 3~
- Default Installed Power: 9.9 kW
- Reducible Installed Power:* 6.9 kW
- Boiler Heating Elements Power:* 9 kW
- Boiler Reducible To:* 6 kW
- Electrical power max.: 12.9 kW
- Tank heating elements: 3 kW
Water:
- Drain line size: 20.5mm
- Inlet water supply pressure: 0.5-7 bar
- Boiler Capacity (lt): 12
- Tank Capacity (lt): 24
Air Emission:
- Latent heat: 500 W
- Sensible heat: 2000 W
Sustainability
- Water supply temperature*: 10-65 °C
- Water consumption per cycle (lt)**: 2
- Noise level: <63 dBA
Key Information:
- N° of cycles: 3
- Duration cycle:* 45/84/150 sec.
- Duration cycle - NSF/ANSI 3 compliant: 57/84/150 sec.
- Racks per hour:* 80
- Racks per hour - NSF/ANSI 3 compliant: 63
- Dishes per hour:* 1440
- Dishes per hour - NSF/ANSI 3 compliant: 1134
- Wash temperature: 55-65 °C
- Wash temperature - NSF/ANSI 3 compliant: 75 °C
- Rinse temperature: 84 °C
- Net weight: 117 kg
- Shipping weight: 134 kg
- Shipping volume: 1.23 m³
-
Packaging size
(WxDxH): 920x770x1730 mm -
* According to market standard, the productivity is declared at an inlet water supply temperature of 50°C . If the water is supplied at 65°C, the power can be reduced by 3 kW without any loss in productivity. -
NOTE:
If the water supply temperature is less than 50°C, it is necessary to request higher power to maintain productivity.